Olight FOL-BALDR-IR BALDR IR Rail Mount Light w Infrared - 1350Lm

Olight FOL-BALDR-IR BALDR IR Rail Mount Light w Infrared - 1350Lm

The BALDR IR is a rail-mounted LED light and infrared light. Accurate, reliable and invisible, the BALDR IR gives you a great advantage. Designed for Picatinny and Glock rails, this professional tool is highly durable and provenly recoil-proof. Select the white-light mode and activate with the ambidextrous tail switch, it produces a beam between 300-1350 lumens with a far-reaching spot and ample soft flood for situational awareness. Select and activate the IR mode, it emits a focused IR beam from the bottom, invisible to the naked eye, but perfect for night vision goggles.

It is powered by 2x CR123A batteries to run longer than most products on the market, and has a nimble swing which allows you to install and detach it with on hand instantly. The two adjustable screws are used to zero the IR beam accurately. Once set in place, it is hard to go loose or off calibration.

Features:

• Optimized by a TIR lens, the white beam is up to 1,350 lumens bright and 260 meters far, good for near and far situational awareness.
• Commercially available Class 1 eye-safe IR beam sight <0.78mW (850 nm).
• The quick mount/detach system matches well with Glock rails (adapter already installed) and Picatinny rails.
• Simple mode switch to select White Light, OFF, or IR Beam; popular ambidextrous tail switch to access different outputs.
• Powered by two CR123A batteries, the white light runs up to 4 hours, while the IR runs up to incredibly 80 hours.
• Calibrated by two adjustable screws. It withstands strong impacts and recoils.

Specifications:

• Light Source: 1x High-Performance Neutral White LED
• Infrared Source: 1x Class 1 Eye-safe IR Beam Emitter
• Light Form: Standard hotspot diameter with impressive distance. Perfect all-around beam profile
• Lens/Reflector Type: TIR Optic Lens
• Mode Operation: Ambidextrous Rear Switch
• Power Source: 2 x CR123A Batteries (included)
• Peak Beam Distance: 260 meters
• Output / Runtime:
• Level 1: 1,350 lumens / 1 minute (then steps down to 500Lm for 78 minutes, then down to 300Lm for 20 minutes)
• Level 2: 300 lumens / 4 hours
• Strobe
• IPX Rating: IPX-4
• Impact Resistance: 1 meter
• Dimensions:
  • Length - 84mm
  • Head Diameter - 36.5mm
• Weight: 129g

Includes:

• BALDR IR Torch
• 2x CR123A Batteries
• Picatinny 1913 Rail Mount Adapter
• 2x Rail Mount Adapter Screw
• H1.5 Allen Wrench
• 2x Adjustable Screw
• User Manual