Bussmann PROBRK002 RTMR Low Profile Bracket

Bussmann PROBRK002 RTMR Low Profile Bracket

Bussmann PROBRK002 RTMR Low Profile Bracket features an overall height of 31mm which provides clearance for a maximum of 20 cables below. Therefore we recommend this bracket be used with the 20 way fuse RTMR block.

Features:
- Robust one piece design in black power coat nish.
- 6 xing holes to secure the bracket to a panel.
- lower cutout to allow cables to pass through the panel.

Bracket Material: Zinc Anneal powder coated black
Hardware: 4 x stainless steel screws & lock washers included for mounting the RTMR block to the bracket as illustrated below.
Notes: Due to the low height of this bracket it is only recommended for use with fuse / breaker type blocks listed below to ensure there is enough clearance underneath for the cables.

Assembly Instructions
1. Secure the bracket to the vehicle.
2. Slide the RTMR block under the four mounting points on the bracket.
3. Secure the RTMR block to the bracket using the four included screws and lock washers.