DEUTSCH industrial environmentally sealed electrical connectors are for critical applications and are designed to withstand the harshest and most challenging environments.

Deutsch AEC Series

DEUTSCH AEC Series connectors are environmentally sealed, heavy duty electrical connectors that accept size 16 contacts. The AEC Series connectors are constructed of heavy duty thermoplastic and offer receptacles with either in-line or PCB mounting options.

Key Features:

• Accepts contact size 16 (13 amps)
• 14-20 AWG
• 40 cavity arrangement

Material Specifications

• Grommet: Silicone rubber
• Jackscrew: Steel
• Plug Threaded Inserts: Steel
• Shell: Thermoplastic

Deutsch DRB Series

The DRB Series connectors are heavy duty connectors ideal for bulkhead applications. They are designed to accommodate multiple wire gauges and feature high pin counts, including 48, 60, 102, and 128 cavities. To increase the design flexibility, the DRB Se- ries offers several mounting flange options and wire arrangements. The DRB Series is perfectly suited to on and off highway applications, marine, industrial, and agriculture markets in harsh environments.

Key Features:

• Accepts contact sizes 4 (100 amps), 8 (60 amps), 12 (25 amps), 16 (13 amps), and 20 (7.5 amps)
• 6-22 AWG
• 48, 60, 102, and 128 cavity arrangements

Material Specifications

• Flange Body: Thermoplastic
• Flange Clip: Steel
• Grommet: Silicone rubber
• Jackscrew: Steel
• Receptacle Threaded Inserts: Steel
• Shell: Thermoplastic
• Wedgelocks: Thermoplastic

Deutsch DRC Series

The environmentally sealed DRC Series is a rectangular connector series that offers insert arrangements of 24, 40, 50, 60, 64, 70, 76, and 80 cavities and accept size 12, 16, and 20 contacts. Several mounting options are available including in-line, flange mount, and PCB mount.

Key Features:

• Accepts contact sizes 16 (13 amps) and 20 (7.5 amps)
• 14-22 AWG
• 24, 38, 40, 50, 60, 64, 70, and 80 cavity arrangements

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Jackscrew: Steel
• Receptacle Threaded Inserts: Steel/Brass
• Shell: Thermoplastic

Deutsch DT Series

DEUTSCH DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility. The DT Series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.

Key Features:

• Accepts contact size 16 (13 amps)
• 14-20 AWG
• 2, 3, 4, 6, 8, and 12 cavity arrangements

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Receptacle Interfacial Seal: Silicone rubber
• Shell: Thermoplastic
• Wedgelocks: Thermoplastic

Deutsch DTHD Series

DTHD connectors are single terminal connectors for heavy duty applications. Easy to install, environmentally sealed and compact in size, they are a simple, field serviceable alternative to a splice. DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line.

Key Features:

• Accepts contact sizes 4 (100 amps), 8 (60 amps), and 12 (25 amps)
• 6-14 AWG
• 1 cavity arrangement

Material Specifications

• Grommet: Silicone rubber
• Shell: Thermoplastic

Deutsch DTM Series

DEUTSCH DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.

Key Features:

• Accepts contact size 20 (7.5 amps)
• 16-22 AWG
• 2, 3, 4, 6, 8, and 12 cavity arrangements

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Receptacle Interfacial Seal: Silicone rubber
• Shell: Thermoplastic
• Wedgelocks: Thermoplastic

Deutsch DTP Series

DEUTSCH DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors.

Key Features:

• Accepts contact size 12 (25 amps)
• 10-14 AWG
• 2 and 4 cavity arrangements

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Receptacle Interfacial Seal: Silicone rubber
• Shell: Thermoplastic
• Wedgelocks: Thermoplastic

Deutsch DTV Series

DEUTSCH DTV Series connectors offer the same time tested reliability and performance as the DT Series, with the added flexibility of an 18 cavity flanged design.

Key Features:

• Accepts contact size 16 (13 amps)
• 14-20 AWG
• 18 cavity arrangement
• Flange mount

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Receptacle Interfacial Seal: Silicone rubber
• Shell: Thermoplastic
• Wedgelocks: Thermoplastic

Deutsch HD10 Series

The HD10 is an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. All HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts. The HD10 Series is heavily used for diagnostic connectors, eliminates problems associated with assembly and maintenance time, and is designed for long service life.

Key Features:

• Accepts contact sizes 4 (100 amps), 12 (25 amps), and 16 (13 amps)
• 6-20 AWG
• 3, 4, 5, 6, and 9 cavity arrangements

Material Specifications

HD10 Series

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Receptacle Interfacial Seal: Silicone rubber
• Shell: Thermoplastic

Deutsch HD30 Series

DEUTSCH HD30 Series connectors are constructed from a metal shell developed to meet the needs of the heavy duty equipment and transportation industries. The HD30 features include quick connect-disconnect bayonet cou- pling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system.

Key Features:

• Accepts contact sizes 4 (100 amps), 8 (60 amps), 12 (25 amps), 16 (13 amps), and 20 (7.5 amps)
• 6-22 AWG
• 2, 6, 7, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35, and 47 cavity arrangements

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Plug Coupling Ring: Aluminum
• Shell: Aluminum

Deutsch HDP20 Series

The HDP20 Series is a heavy duty rated, environmentally sealed, composite shell, multi-pin connector. The composite thermoplastic shell is ideal in applications where chemicals can damage a connector housing. HDP20 features quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system.

Key Features:

• Accepts contact sizes 4 (100 amps), 8 (60 amps), 12 (25 amps), 16 (13 amps), and 20 (7.5 amps)
• 4-22 AWG
• 2, 6, 7, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35, and 47 cavity arrangements

Material Specifications

• Grommet: Silicone rubber
• Insert Retainer: Thermoplastic
• Plug Coupling Ring: Thermoplastic
• Shell: Thermoplastic

Deutsch Jiffy Splice

DEUTSCH Jiffy Splices are a unique, field-serviceable alternative to permanent splices. Made from the same high quality silicone elastomer as DEUTSCH connector seals and grommets, the Jiffy Splice body houses a contact retention system that secures a mated pair of contacts in a compact environmentally sealed unit. Jiffy Splices are easy to install and service with standard DEUTSCH tools.

Key Features:

• Accepts contact sizes 4 (100 amps), 12 (25 amps), and 16 (13 amps)
• 6-20 AWG
• 1 cavity arrangement

Material Specifications

• Cover seal: Silicone Rubber

Deutsch EEC Boxes

TE Connectivity offers compact DEUTSCH circuit board enclosures that accept snap-in headers. The enclosure features a through hole mounting flange on each side, as well as optional venting. Designed with space to accommodate one or more DT or DTM Series interfaces, the headers feature 90° pins. A radial flange seal provides environmental sealing to the enclosure. The headers mate with the DT and DTM standard plugs.

Key Features:

• Through hole mounting flange on each side of enclosure
• Headers accommodate one or more DT or DTM Series interfaces
• Headers feature 90° pins

Material Specifications

• Enclosure: Thermoplastic or clear Ultem® material
• Header Shell: Thermoplastic
• Header Contacts: Molded-in nickel or gold for mating side, tin plated PCB side
• Grommet: Silicone rubber

Deutsch STRIKE Series

The STRIKE connector series features a lever lock system and is designed for heavy duty equipment applications. The environmentally sealed series offers two different size rugged housings that accept contacts from size 20 to 16 with arrangements of 32 and 64 cavities. The lever lock combined with varying cavity arrangements allows the STRIKE Series connectors to offer flexible options for electrical designs.

Key Features:

• Accepts contact sizes 16 (13 amps) and 20 (7.5 amps)
• 14-20 AWG
• 32 and 64 cavity arrangements

Material Specifications

• Flange Seal: Silicone rubber
• Plug Grommet: Silicone rubber
• Receptacle Threaded Inserts: Brass
• Shell: Thermoplastic
• TPA: Thermoplastic

DEUTSCH Tooling

TE Connectivity offers several types of tools to assist with hand and production wire crimping. The tools are specific to the solid contacts or the stamped & formed contacts. To ensure a proper crimp and achieve the highest performance specifications, DEUTSCH contacts must be crimped with DEUTSCH tooling. Proper parts, procedures, and tooling must be used.

Key Features:

• Hand tools for field service, prototype, and low-volume production
• Automated tooling for high production volumes

Deutsch Contacts

Several contacts are used interchangeably across most connector product lines. This commonality improves performance, reliability, and maintainability by reducing changes in the assembly of the wire harness. The use of the same contact systems eliminates many of the failures reported in harnesses where hundreds of different terminations are used. The solid contacts are designed for use with larger wire size and heavy-duty applications. Stamped & formed contacts are designed for use where wire termination costs are of primary concern without sacrificing reliability of electrical circuits.

Key Features

• Solid and stamped & formed style contacts
• Nickel, tin, or gold plating for corrosion resistance
• Maximum Rated Amps at 125° Continuous = 7.5 to 100 amps

Material Specifications

• Contacts are made of copper alloy
• Nickel, tin, or gold plating